Aerodyne

Better Gear, Better Value, Better Skydives

Icon Pro neXgen

Icon Pro Standard Configuration and Options

The ICON sport model comes standard with:

- Aerodyne’s innovative and patented stainless steel miniforce™
- 3-ring system.
- Articulated harness with hip rings and all stainless steel hardware.
- Elastic bungee between the leg pads, to keep the leg pads in place during free fly manoeuvres.
- Standard wide chest strap.
- Smaller container sizes (I1, I2, I3 and I4) come standard with cut-in lateral back straps [ see photo].
- Protective panels near the bottom of the reserve container.
- Protective main closing loop compartment.
- Bottom of container pouch for hand deployed pilot chute.
- Hand deployed pilot chute with kill line bridle.
- The size of the hand deployed pilot chute is matched with the main. container size.
- Main deployment bag.
- Innovative reserve freebag with spring-loaded pilot chute [see photo]
- Stainless steel reserve ripcord.
- Pillow model cutaway handle with conduit insert for improved grip.
- Mini-risers (length is 20 inch or 51 cm) with velcroless toggles and equipped with stainless steel ring for RSL use [see photo]
- Unique stainless steel hook knife located under left hand 3-ring cover.
- AAD ready, cutter is placed on the kicker plate flap directly below the pilotchute.
I- con embroidery on right hand 3 ring cover.
- Your choice of logo embroidery on side walls.

The following variants are available at no additional charge:

- Choice of custom colors.
- 1 inch narrow chest strap.
- Parapack, Cordura, or Spacerfoam backpad.
- Chest rings for improved harness articulation.
- Hackey sack handle on hand deployed pilot chute.
- Freefly handle on hand deployed pilot chute [see photo]

The following options are available at additional charge:

- Skyhook RSL system.
- Soft pad reserve ripcord handle with conduit insert for improved grip.
- Custom embroidery on side walls and left hand 3-ring cover.

Icon Sport

Icon Sport configuration and available options:

The Icon SportTM model comes standard with:

- Aerodyne’s innovative and patented stainless steel MiniforceTM 3-ring system
- Your choice of type 8 wide chest strap or type 17 narrow chest strap
- 22” type17 mini-risers with velcroless toggles, excess line stowage, and stainless steel ring for RSL use
(optional lengths include 18”, 19”, 20” and 24”)
- RSL lanyard
- AAD ready with pouch, channels, and closing loop
- Protective panels near bottom of reserve container to ensure clean main riser and line clearance
- BOC pouch for hand deployed pilot chute
- Hand deployed, collapsible pilot chute with your choice of F111 or ZP; hacky, freefly, or plastic handle. Main pc color choices are white or black with black hackey or freefly handle.
- Freefly friendly riser covers and main and reserve pin protection
- Choice of cordura or ballistic container and backpad material in black
- Choice of arrow color and embroidery colors
- Aerodyne embroidery on left ring cover
- Aerodyne Icon SportTM embroidery on side walls

Options available for an additional charge:

- Soft pad reserve handle
- Custom embroidery on right ring cover or handles
- Wing suit configuration

Icon Student neXgen

Icon Student standard configuration and available options:

The ICON student harness-container comes standard with:

Innovative reserve freebag: We have designed a line stow retention system, specifically designed to help control reserve deployments at high speeds, while not sacrificing low speed requirements. The skydiving industry agrees that poorly controlled suspension lines can be a major causative factor in hard openings. This technology, formerly found only on high altitude, high-speed military systems is now available to everyone in the Icon.

New “Link-Stop” panels! These small panels, located inside the main container, prevent connector links from wrapping around or catching on the corner of the reserve container. Links that catch the reserve container or are wrapped around this corner, have resulted in anything from line twists and off-heading openings to tearing reserve containers out of rigs!

Cypres ready, the display can be position on the backpad or under the see-through window of the reserve protection flap.

- Heavy Cordura fabric.
- Aerodyne new innovative and patented stainless steel miniforce™ 3-ring system.
- Articulated harness with hip rings and all stainless steel hardware.
- Adjustable harness.
- Elastic bungee between the leg pads, to keep the leg pads in place during freefall maneuvers.
- Standard width chest strap.
- Bottom of container pouch for hand deployed pilot chute.
- Hand deployed pilot chute.
- Main deployment bag.
- Stainless steel reserve ripcord.
- Pillow model cutaway handle with conduit insert for improved grip.
- Reserve static line (RSL) system.
- Standard width main risers.
- Icon embroidery on right hand 3 ring cover.
- Aerodyne embroideries on side walls.

The following variants are available at no aditional charge:

- Custom colors.

The following options are available at additional charge:

- Manual ripcord activation (BOC or hip position) with spring loaded pilotchute.
- AFF secondary handles for HD or spring loaded pilotchute.
- Direct bag with static line.
- B12 snaps on leg straps.
- Custom embroideries on side walls and left hand 3-ring cover.